Attention:
• Read
"Installation Guidelines" on page 45
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
"Power off the server" on page
CAUTION:
Make sure to have three people operate the server removal procedures to prevent injury.
Procedure
Step 1.
Loosen the two thumbscrews located on the front of the server to disengage it from the rack.
Rack front
Figure 22. Disengaging server from the rack
Thumbscrew
1
Step 2.
Hold the mounting ears on the front of the server; then, slide the server all the way out until it stops.
and
"Safety inspection checklist" on page 46
54.
.
Chapter 5
Hardware replacement procedures
to ensure that you
55