2.5-inch drive backplane cable routing
Follow the instructions in this section to learn how to do cable routing for the 2.5-inch drive backplane.
Figure 168. Cable routing for the 2.5-inch drive backplane
Cable
From
Backplane: NVMe 0-1 and NVMe 2-3
1
Backplane: Power connector
2
Backplane: SAS/SATA
3
Backplane: NVMe 4-5 and NVMe 6-7
4
Front I/O expansion board cable routing
Follow the instructions in this section to learn how to do cable routing for the front I/O expansion board.
To
System board assembly: PCIe connector 4
System board assembly: Backplane power
connector
8i RAID/HBA adpater installed on the PCIe riser 2:
• Gen4 8i RAID/HBA adapter: C0
• Gen3 8i RAID/HBA adapter: C0, C1
System board assembly: PCIe connector 8
.
Chapter 6
Internal cable routing
201