Lenovo ThinkSystem SR675 V3 User Manual page 190

• Depending on the specific type, the GPU adapter might look slightly different from the illustrations in this
section.
• Follow the additional instructions in any documentation that comes with your GPU adapter.
Watch the procedure
A video of this procedure is available at YouTube:
AgTVLhsU24Nhel3_oYlnGT
Procedure
Step 1. Make preparation for this task.
a. Remove the top cover. See
b. Remove the GPU adapter link bridge(s) if installed. See
on page 190.
Step 2. Remove the GPU adapter.
a. Remove the five screws from the top of the cross bar.
b. Locate the GPU adapter to be removed, and disconnect the power cable from the GPU
adapter.
c. Remove the two screws that secure the GPU adapter to the chassis.
d. Grasp the GPU adapter by its edges and carefully pull it out of the PCIe slot.
Figure 148. GPU adapter removal
After you finish
1. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
ThinkSystem SR675 V3 User Guide
182
.
"Remove the top cover" on page
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
154.
"Remove a GPU adapter link bridge"