Step 5.
(Optional) Secure the server to the rack.
a.
Secure the server to the rear of the rack. Select the first rail you want to secure. Insert a washer
and M5 screw; then, fasten the M5 screw. Repeat to secure the other rail.
Rack rear
Figure 30. Securing the server to the rear of the rack
Washer
1
M5 screw
2
b.
Secure the server to the front of the rack. Fasten the two thumbscrews located on the front of
the server.
Rack front
Figure 31. Securing the server to the front of the rack
.
Chapter 5
Hardware replacement procedures
63