Flash Power Module Replacement - Lenovo ThinkSystem SR675 V3 User Manual

Figure 45. Fan cage installation
After you finish
1. Reinstall the fans. See
2. Complete the parts replacement. See

Flash power module replacement

Follow instructions in this section to remove and install the flash power module.
Remove the flash power module
Follow instructions in this section to remove the flash power module.
About this task
Attention:
• Read "Installation Guidelines" on page 45
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
"Power off the server" on page
• If the server is installed in a rack, slide the server out on its rack slide rails to gain access to the top cover,
or remove the server from the rack. See
Watch the procedure
A video of this procedure is available at YouTube:
AgTVLhsU24Nhel3_oYlnGT
Procedure
Step 1. Make preparation for this task.
a. Remove the top cover. See
b. Disconnect the cable from the flash power module.
c. Remove the PCIe riser where the flash power module has been installed. See
riser" on page
ThinkSystem SR675 V3 User Guide
80
"Install a fan" on page 77.
"Complete the parts replacement" on page
and "Safety inspection checklist" on page 46
54.
"Remove the server from rack" on page
.
"Remove the top cover" on page
110.
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
154.
194.
to ensure that you
54.
"Remove a PCIe