Lenovo ThinkSystem SR675 V3 User Manual page 199

• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
"Power off the server" on page
• If the server is installed in a rack, slide the server out on its rack slide rails to gain access to the top cover,
or remove the server from the rack. See
• Depending on the specific type, the GPU adapter might look slightly different from the illustrations in this
section.
• Follow the additional instructions in any documentation that comes with your GPU adapter.
Watch the procedure
A video of this procedure is available at YouTube:
AgTVLhsU24Nhel3_oYlnGT
Procedure
Step 1. Remove the top cover. See
Step 2. Remove the GPU adapter link bridge.
a. Press the suction cup against the GPU adapter link bridge until it adheres to the GPU
adapter link bridge.
Note: Depending on the configuration, there may be one or three GPU adapter link bridges on
the GPU adapters. Remove all GPU adapter link bridges from the GPU adapters.
Figure 156. GPU adapter link bridge removal
b. Pull up the suction cup and remove the GPU adapter link bridge together with the suction
cup from the GPUs.
54.
"Remove the server from rack" on page
.
"Remove the top cover" on page
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
154.
.
Chapter 5 Hardware replacement procedures
54.
191