Lenovo ThinkSystem SR675 V3 User Manual page 110

Step 3. Remove the memory module from the slot.
Attention: To avoid breaking the retaining clips or damaging the memory module slots, handle the
clips gently.
a. Gently open the retaining clip on each end of the memory module slot.
b. Grasp the memory module at both ends and carefully lift it out of the slot.
Figure 69. Memory module removal
After you finish
1. A memory module slot must be installed with a memory module or a memory module filler. See
memory module" on page
2. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Install a memory module
Follow instructions in this section to install a memory module.
About this task
See "Memory module installation rules and order" on page 49
configuration and setup.
Attention:
• Read "Installation Guidelines" on page 45
work safely.
• Make sure to remove or install memory module 20 seconds after disconnecting power cords from the
system. It allows the system to be completely discharged of electricity and safe for handling memory
module.
ThinkSystem SR675 V3 User Guide
102
102.
and "Safety inspection checklist" on page 46
for detailed information about memory
"Install a
to ensure that you