Lenovo ThinkSystem SR675 V3 User Manual page 94

• If the server is installed in a rack, slide the server out on its rack slide rails to gain access to the top cover,
or remove the server from the rack. See
Watch the procedure
A video of this procedure is available at YouTube:
AgTVLhsU24Nhel3_oYlnGT
Procedure
Step 1. Remove the top cover. See
Step 2. Disconnect the front operator panel cable from the system board assembly as illustrated.
Figure 51. Front operator panel cable disconnection
Step 3. Remove the front operator panel.
a. Press and hold on the two release tabs on the top of the drive bays.
b. Grasp and pull the front operator panel to remove it from the server.
ThinkSystem SR675 V3 User Guide
86
"Remove the server from rack" on page
.
"Remove the top cover" on page
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
154.
54.