Lenovo ThinkSystem SR675 V3 User Manual page 188

A video of this procedure is available at YouTube:
AgTVLhsU24Nhel3_oYlnGT
Procedure
Step 1. Make preparation for this task.
a. Remove the top cover. See
b. Remove the network adapter(s) if necessary. See
Step 2. Disconnect the cables that are connected to the front I/O expansion board.
Step 3. Unfasten the five screws from the front I/O expansion board, and remove it from the chassis.
Figure 146. Front I/O expansion board removal
After you finish
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Install the front I/O expansion board
Follow instructions in this section to install the front I/O expansion board.
About this task
Attention:
• Read "Installation Guidelines" on page 45
work safely.
• Touch the static-protective package that contains the component to any unpainted metal surface on the
server; then, remove it from the package and place it on a static-protective surface.
Watch the procedure
A video of this procedure is available at YouTube:
AgTVLhsU24Nhel3_oYlnGT
ThinkSystem SR675 V3 User Guide
180
.
"Remove the top cover" on page
and "Safety inspection checklist" on page 46
.
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
154.
"Remove a network adapter" on page
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
106.
to ensure that you