Attention: Service label is located on the inside of the top cover.
Figure 117. Top cover removal
After you finish
Attention: For proper cooling and air flow, install the top cover before you power on the server. Operating
the server with the top cover removed might damage server components. See
155
for more details.
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Install the top cover
Follow instructions in this section to install the top cover.
About this task
Attention:
• Read
"Installation Guidelines" on page 45
work safely.
• Make sure that all cables, adapters, and other components are installed and seated correctly and that you
have not left loose tools or parts inside the server.
• Make sure that all internal cables are correctly routed. See
Note: If you are installing a new top cover, attach the service label to the inside of the new top cover first if
necessary.
Watch the procedure
A video of this procedure is available at YouTube:
AgTVLhsU24Nhel3_oYlnGT
Procedure
and
"Safety inspection checklist" on page 46
.
Chapter 6 "Internal cable routing" on page
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
.
Chapter 5
Hardware replacement procedures
"Install the top cover" on page
to ensure that you
195.
155