External Diagnostics Handset - Lenovo ThinkSystem SR675 V3 User Manual

Figure 187. XCC system management port LEDs
Table 27. XCC system management port LEDs
Description
LED
XCC system
1
Use this green LED to distinguish the network connectivity status:
management port
(1GB RJ-45)
• Off: The network link is disconnected.
Ethernet port link
• Green: The network link is established.
LED
XCC system
2
Use this green LED to distinguish the network activity status:
management port
(1 GB RJ-45)
• Off: The server is disconnected from a LAN.
Ethernet port
• Green: The network is connected and active.
activity LED

External diagnostics handset

The external diagnostics handset is an external device that is connected to the server with a cable, and it
allows quick access to system information such as errors, system status, firmware, network, and health
information.
Location of the external diagnostics handset
Location
The external diagnostics handset is connected to the
server with an external cable.
Callouts
External diagnostics handset
1
Magnetic bottom
2
With this component, the diagnostic handset can be
attached to the top or side of the rack with hands spared
for service tasks.
External diagnostics connector
3
This connector is located on the front of the server, and is
used to connect an external diagnostics handset.
Chapter 8
.
Problem determination
235