Lenovo ThinkSystem SR675 V3 User Manual page 192

• "The 4-DW GPU Model front view" on page 15
• "The 8-DW GPU Model front view" on page 16
Step 2. (Optional) If the GPU adapter link bridges are to be installed, remove the link connector cover from
the GPU adapter. Keep the link connector cover in case it is needed in the future.
Note: Depending on the configuration, there may be one or three GPU adapter link bridges on the
GPU adapters. When linking a GPU pair, all link connectors on the GPU adapters must be linked.
Figure 150. Link connector cover removal
Step 3. Install the GPU adapter.
Note: If the PCIe slot is covered with a slot bracket, remove the bracket from the chassis first.
a. Align the GPU adapter with the PCIe slot on the chassis. Then, carefully press both ends of
the GPU adapter straight into the slot until it is securely seated.
b. Connect the power cable to the GPU adapter.
c. Fasten the two screws that secure the GPU adapter to the chassis.
d. Fasten the five screws on the top of the cross bar.
ThinkSystem SR675 V3 User Guide
184