Lenovo ThinkSystem SR675 V3 User Manual page 95

Figure 52. Front operator panel removal
After you finish
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Install the front operator panel
Follow instructions in this section to install the front operator panel.
About this task
Attention:
• Read "Installation Guidelines" on page 45
work safely.
• Touch the static-protective package that contains the component to any unpainted metal surface on the
server; then, remove it from the package and place it on a static-protective surface.
Watch the procedure
A video of this procedure is available at YouTube:
AgTVLhsU24Nhel3_oYlnGT
Procedure
Step 1. Locate the front operator panel slot based on the server front view of your configuration. See below
for more details:
• "The 4-DW GPU Model front view" on page 15
• "The 8-DW GPU Model front view" on page 16
Step 2. Align the front operator panel with the slot on the top of the drive bays and slide it in.
and "Safety inspection checklist" on page 46
.
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
.
Chapter 5 Hardware replacement procedures
to ensure that you
87