Lenovo ThinkSystem SR675 V3 User Manual page 108

• Memory modules are sensitive to static discharge and require special handling. Refer to the standard
guidelines for "Handling static-sensitive devices" on page
– Always wear an electrostatic-discharge strap when removing or installing memory modules.
Electrostatic-discharge gloves can also be used.
– Never hold two or more memory modules together so that they do not touch each other. Do not stack
memory modules directly on top of each other during storage.
– Never touch the gold memory module connector contacts or allow these contacts to touch the outside
of the memory module connector housing.
– Handle memory modules with care: never bend, twist, or drop a memory module.
– Do not use any metal tools (such as jigs or clamps) to handle the memory modules, because the rigid
metals may damage the memory modules.
– Do not insert memory modules while holding packages or passive components, which can cause
package cracks or detachment of passive components by the high insertion force.
Important: Remove or install memory modules for one processor at a time.
Watch the procedure
A video of this procedure is available at YouTube:
AgTVLhsU24Nhel3_oYlnGT
Procedure
Attention: Make sure to remove or install memory module 20 seconds after disconnecting power cords from
the system. It allows the system to be completely discharged of electricity and safe for handling memory
module.
Step 1. Make preparation for this task.
a. Remove the top cover. See
b. Remove the air baffle. See
c. Locate the memory module slots and determine which memory module to be removed.
ThinkSystem SR675 V3 User Guide
100
.
"Remove the top cover" on page
"Remove the air baffle" on page
48.
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
154.
65.