a.
Pinch and hold the blue touch points on the top of the fan.
b.
Lift the fan out of the chassis.
Figure 42. Fan removal
After you finish
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Install a fan
Follow instructions in this section to install a fan.
About this task
Attention:
• Read
"Installation Guidelines" on page 45
work safely.
• Make sure to replace a defective fan with another unit of the exact same type.
• Touch the static-protective package that contains the component to any unpainted metal surface on the
server; then, remove it from the package and place it on a static-protective surface.
Watch the procedure
A video of this procedure is available at YouTube:
AgTVLhsU24Nhel3_oYlnGT
Procedure
Step 1.
Make sure the fan cage is installed in the chassis. See
and
"Safety inspection checklist" on page 46
.
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
"Install the fan cage" on page
.
Chapter 5
Hardware replacement procedures
to ensure that you
79.
77