Lenovo ThinkSystem SR675 V3 User Manual page 175

EMC shield and filler panel from the bay or PCI or PCIe adapter slot cover in the event that you later
remove the device.
• For a complete list of supported optional devices for the server, see
• Depending on the server configuration for 8-DW GPU Model, the following drive types can be installed
into each drive cage with their corresponding drive bay numbers:
– Up to six E1.S hot-swap drives
Figure 130. E1.S hot-swap drive bay numbering in 8-DW GPU Model
– Up to four E3.S hot-swap drives
Figure 131. E3.S hot-swap drive bay numbering in 8-DW GPU Model
Firmware and driver download: You might need to update the firmware or driver after replacing a
component.
• Go to
https://datacentersupport.lenovo.com/tw/en/products/servers/thinksystem/sr675v3/7d9q/downloads/
to see the latest firmware and driver updates for your server.
driver-list/
• Go to "Update the firmware" on page 217
Watch the procedure
A video of this procedure is available at YouTube:
AgTVLhsU24Nhel3_oYlnGT
Procedure
Step 1. Hold the handle of the EDSFF drive cage cover and pull it out of the server.
for more information on firmware updating tools.
.
https://serverproven.lenovo.com
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
.
Chapter 5 Hardware replacement procedures
.
167