Lenovo ThinkSystem SR675 V3 User Manual page 133
Hide thumbs
Also See for ThinkSystem SR675 V3:
- Manual (200 pages) ,
- System configuration manual (86 pages)
Table of Contents
Advertisement
About this task
Attention:
• Read
"Installation Guidelines" on page 45
work safely.
• Touch the static-protective package that contains the component to any unpainted metal surface on the
server; then, remove it from the package and place it on a static-protective surface.
Note: During normal operation, each power supply bay must contain either a power supply unit or a power
supply filler for proper cooling.
Figure 92. Power supply bay numbering
Watch the procedure
A video of this procedure is available at YouTube:
AgTVLhsU24Nhel3_oYlnGT
Procedure
Step 1.
If a power supply filler is installed in the bay, pull the filler out of the bay.
Step 2.
Make sure the label on the power supply is facing up; then, grasp the handle and slide it into the
power supply bay until it clicks into place.
Figure 93. Power supply unit installation
Step 3.
Connect the power supply unit to a properly grounded electrical socket with a power cord.
and
"Safety inspection checklist" on page 46
.
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
.
Chapter 5
Hardware replacement procedures
to ensure that you
125
Advertisement
Table of Contents
Troubleshooting
