Electrical/Image Adjustment; Calling The Tech. Rep. Mode To Screen; List Of Functions - Minolta CF2002 Service Manual

2.

ELECTRICAL/IMAGE ADJUSTMENT

NOTE
• Given in the following are only those adjustments that are made using the External Panel
Controller.
2-1.

Calling the Tech. Rep. Mode to Screen

1. Set up the Service Jig.
☞ See "Setting up the Service Jig." (D-2)
2. Press the Utility key.
3. Touch [Meter Count].
4. Press the following keys in this order:
Stop → 0 → 0 → Stop → 0 → 1
NOTE
• Ensure appropriate security for Tech. Rep. mode setting procedures. They should never
be known to any unauthorized person not involved with service jobs.
2-2.

List of Functions

Function
Top Margin
Left Margin
Dup. Left Margin
Zoom for FD
Color Shift Correction
LPH Chip Adjust
PRT Max Density
PRT Highlight
Background Voltage Margin
ATDC Level Setting
2nd Transfer Adjust
Fuser Temp.
Fuser Speed
X-Rite Calibration (Gradation Adjust)
Description
To make the adjustments, use the External
Panel Controller and work on the PC screen.
For the specific adjustment procedures, see
the Service Manual for the CF3102/2002
copier.
☞ See X-Rite Calibration. (D-6)
D-5