Nortel 3050 Command Reference Manual page 488

488 CLI Dumps
ena enabled
ipsecmode native
contip 0.0.0.0
portalmsg
<p>From this page you can gain full network access. This
<strong>requires</strong> that Net Direct is enabled or that
you have either Nortel&#039;s IPSEC client (version 4.89 or
better)
and/or SSL-VPN (TDI version 1.1 or better) client installed. If
the Net Direct
installable client is installed it will be used if Net Direct is
enabled.</p>
<p>Note: Your browser must support Java. If not download
SUN&#039;s J2SE JRE from
<a class="white_link"
href="javascript:download_jre()">www.java.com</a>.</p>
<p>Remember: You can only access resources on the network as
defined by
your access rights. Contact your network operator if you are
dissatisfied with your current access rights.</p>
...
appletmsg
The quest for full network access has started._The outcome of
the quest will be
indicated in the progress bar and console window below.
...
/cfg/vpn 1/portal/lang/.
setlang en
/cfg/vpn 1/portal/lang/beconv/.
/cfg/vpn 1/portal/whitelist/.
ena disabled
/cfg/vpn 1/portal/whitelist/domains/.
/cfg/vpn 1/portal/blacklist/.
ena disabled
/cfg/vpn 1/portal/blacklist/domains/.
/cfg/vpn 1/linkset 1/.
name base-links
autorun false
/cfg/vpn 1/linkset 1/link 1/.
href "<smb>/xnet/smb/duva.bluetail.com/WORKGROUP/sten"
text "smb link"
type smb
/cfg/vpn 1/linkset 1/link 1/smb/.
/cfg/vpn 1/linkset 1/link 2/.
href <netdirect>
text "Net Direct"
type netdirect
/cfg/vpn 1/linkset 1/link 2/netdirect/.
Copyright © 2007 Nortel Networks
.
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007