Nortel 3050 Command Reference Manual page 371

/cfg/vpn <id> /linkset <id> /link <id> /forwarder <outlook> Outlook Port Forwarder
Table 146
Port Forwarder Settings Menu (/cfg/vpn/linkset/link/forwarder) (cont'd.)
Command Syntax and Usage
pport
puser
ppass
/cfg/vpn <id> /linkset <id> /link <id> /forwarder
<outlook> Outlook Port Forwarder Link Configuration
[Port forwarder settings Menu]
quick
tunnel
app
Copyright © 2007 Nortel Networks
.
Lets you specify the IP address or domain name of an intermediate
intranet HTTP Proxy server, if users are working from a location
requiring traffic to pass through such a proxy server. Skipping the
prompt means that all applet traffic is tunneled straight to the VPN
Gateway.
The phost command corresponds to the HTTP proxy host step in the
Quick Setup wizard.
Lets you specify the port number of an intermediate intranet HTTP
Proxy server.
The pport command corresponds to the HTTP proxy port step in the
Quick Setup wizard.
If a HTTP Proxy host/port is specified and the HTTP Proxy host
requires authentication, you have the option to enter a user name and
password.
The puser command corresponds to the HTTP proxy user name step
in the Quick Setup wizard.
If a HTTP Proxy host/port is specified and the HTTP Proxy host
requires authentication, you have the option to enter a user name and
password.
The ppass command corresponds to the HTTP proxy password step
in the Quick Setup wizard.
- Quick port forwarder wizard
- Tunnel menu
- Set application path
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007
Link Configuration 371