Nortel 3050 Command Reference Manual page 115

/cfg/ssl/server <id> /http/dynheader Dynamic Header Configuration 115
Table 27
Redirect Mapping Menu Options (/cfg/ssl/server/http/redirmap) (cont'd.)
Command Syntax and Usage
move <index number to move> <destination index number>
/cfg/ssl/server <id> /http/dynheader Dynamic Header
Configuration
[Dyn Header Menu]
list - List all values
del - Delete a value by number
add - Add a new value
insert - Insert a new value
move - Move a value by number
The Dynamic Header menu is used to create custom HTTP headers to
be sent to backend servers. This feature is useful if the backend server
requires a specific header. As you configure your custom headers you
have the option to specify to which hosts or domains the headers should
be sent.
Table 28
Dynamic Header Menu Options (/cfg/ssl/server/http/dynheader)
Command Syntax and Usage
list
del <header by index number>
add <host/domain> <header pattern>
Copyright © 2007 Nortel Networks
.
Moves a mapping entry up or down in the list of configured entries. The
index numbers you specify must be in use. To view all entries currently
added to the system configuration, use the list command.
Displays all headers that are added to the current HTTP server. The
headers are listed by their respective index number.
Removes the specified header. Use the list command to display the
index numbers of all added entries.
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007