Nortel 3050 Command Reference Manual page 452

452 Command Reference
Table 195
RADIUS Audit Servers Menu Options (/cfg/sys/adm/audit/servers) (cont'd.)
Command Syntax and Usage
insert <index number to insert at> <IP address of RADIUS audit
server to add>
move <index number to move> <destination index number>
/cfg/sys/adm/auth Authentication Configuration
[Authentication Menu]
servers - RADIUS Authentication Servers menu
timeout - Set RADIUS server timeout
fallback - Use local password as fallback
group- RADIUS Group Attribute menu
ena - Enable RADIUS Authentication
dis - Disable RADIUS Authentication
The Authentication menu is used to configure RADIUS authentication of
system users. Authentication applies to both CLI and BBI (Browser-Based
Management Interface) users.
Copyright © 2007 Nortel Networks
.
Adds a RADIUS audit server to the configuration. Specify the IP
address, a TCP port number, and the shared secret. The next available
index number is assigned automatically by the system.
For backup purposes, several RADIUS audit servers can be added.
The VPN Gateway will contact the server with lowest index number
first. If contact could not be established, the NVG will try to contact the
server with the next index number in sequence and so on.
Note: The default port number used for RADIUS audit is 1813.
Assigns a specific index number to the RADIUS audit server you add.
The index number you specify must be in use. RADIUS audit servers
with an index number higher than (and including) the one you specify
will have their current index number incremented by 1.
Moves a RADIUS audit server up or down in the list of configured
servers. The index numbers you specify must be in use. To view all
servers currently added to the configuration, use the list command.
Note:
When RADIUS authentication of system users is enabled, it
applies also to CLI access through the console, and to the "root" login.
The "boot" login used for software reinstall will however always use
the fixed local password.
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007