Nortel 3050 Command Reference Manual page 122

122 Command Reference
Table 31
Socks Settings Menu Options (/cfg/ssl/server/socks) (cont'd.)
Command Syntax and Usage
vpn <VPN identified by number)
defgroup <default group by name>
/cfg/ssl/server <id> /adv AdvancedSettings Menu
[Advanced Settings Menu]
string - String menu
blockstrin - Set strings to block
pool - Connection pooling menu
traflog - UDP syslog Traffic Log menu
loadbalanc - Load balancing menu
sslconnect - SSL connect menu
The Advanced Settings menu is used for handling the connection pooling,
load balancing, and end to end encryption capabilities of the selected
virtual SSL server. The number of menu items available in the Advanced
Settings menu vary according to the type of virtual SSL server currently
selected.
Copyright © 2007 Nortel Networks
.
The default Socks commands are set to connect and bind.
Maps the current socks server to a configured VPN. To view available
VPNs, type /cfg/vpn and press TAB.
Sets an existing user access group that has been defined using the
/cfg/vpn #/aaa/group command as the default user access group.
The default group is applied when an SSL VPN user's group
membership cannot be determined. This typically happens when
an SSL VPN user connects to the VPN in "transparent mode",
and the Socks authentication is set to none. In such a case, the
non-authenticated SSL VPN user will automatically become a member
of the specified default group, and the access control lists associated
with the default group will determine which rights are granted to the
user.
Note: Because the user to which the default group applies is not
authenticated by any means, make sure that the access control lists
associated with the group do not grant excessive rights.
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007