Nortel 3050 Command Reference Manual page 265

Table 94
Trace Menu Options (/cfg/vpn/server/trace) (cont'd.)
Command Syntax and Usage
tcpdump interactive|tftp|ftp|sftp
ping <host name or IP address>
Copyright © 2007 Nortel Networks
.
/cfg/vpn <id> /server/traceTrace Configuration 265
Creates a dump of the SSL traffic flowing between clients and the portal
server. The captured information can either be displayed decrypted on
screen (the default interactive output mode), or saved as a file to a
TFTP/FTP/SFTP server. The server can be specified using either the
host name or the IP address.
If you choose to send the dump as a file to a TFTP server, a number
of files will be sent to the server depending on the amount of captured
information. A number is appended to the file name given in the CLI,
starting at 1 and incremented automatically for additional files. You will
be prompted for a destination file name prefix of your own choice.
If you choose to send the dump as a file to an FTP server, you will be
prompted for the destination file name, as well as a user name and
password valid on the specified FTP server.
For detailed information about the default flags used when issuing the
ssldump command, as well as customizing the default filter expression,
see the SSLDUMP (1) manual pages under UNIX.
Creates a dump of the TCP traffic flowing between clients and the
currently selected virtual SSL server. The captured information can
either be displayed on screen (the default interactive output mode),
or saved as a file to a TFTP/FTP/SFTP server. The server can be
specified using either the host name or the IP address. You can read a
saved TCP traffic dump file using the TCPDUMP or Ethereal application
on a remote machine.
If you choose to send the dump to a TFTP server, a number of files
will be saved on the server depending on the amount of captured
information. A number is appended to the file name given in the CLI,
starting at 1 and incremented automatically for additional files. You will
be prompted for a destination file name prefix of your own choice.
If you choose to send the dump as a file to an FTP server, you will be
prompted for the destination file name, as well as a user name and
password valid on the specified FTP server.
For detailed information about the default flags used when issuing the
tcpdump command, as well as customizing the default filter expression,
see the TCPDUMP (8) manual pages under UNIX.
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007