Nortel 3050 Command Reference Manual page 185

Vpn gateway
Hide thumbs Also See for 3050:
Table of Contents

Advertisement

/cfg/vpn <id> /aaa/auth <id> /radius/idletimeou Idle Timeout Configuration 185
Table 54
RADIUS Servers Menu Options (/cfg/vpn/aaa/auth/radius/servers) (cont'd.)
Command Syntax and Usage
del <RADIUS server by index number>
add <IP address of RADIUS server> <TCP port number> <shared
secret>
insert <index number to insert at> <IP address of RADIUS server
to add>
move <index number to move> <destination index number>
/cfg/vpn <id> /aaa/auth <id> /radius/idletimeou Idle
Timeout Configuration
[Idle Timeout Menu]
vendorid - Set vendor id for idle timeout attribute
vendortype - Set vendor type for idle timeout attribute
ena - Enable Idle-Timeout
dis - Disable Idle-Timeout
The Idle Timeout menu lets you configure your VPN to retrieve an idle
timeout value in seconds from the RADIUS server. When the user's VPN
session has been idle longer than this value, the user is automatically
logged out.
Copyright © 2007 Nortel Networks
.
Displays all RADIUS servers that are added to the RADIUS
configuration in the current VPN. The servers are listed by their
respective index number, IP address, and shared secret.
Removes the specified server from the VPN. Use the list command
to display the index numbers of all added RADIUS servers.
Adds a RADIUS server to the VPN. Specify the IP address, a TCP port
number, and the shared secret. The next available index number is
assigned automatically by the system. A maximum of three RADIUS
servers can co-exist in the configuration.
Note: The default port number used by the RADIUS protocol is 1812.
Assigns a specific index number to the RADIUS server you add. The
index number you specify must be in use. RADIUS servers with an
index number higher than (and including) the one you specify will have
their current index number incremented by 1.
Moves a RADIUS server up or down in the list of configured servers.
The index number you specify must be in use. To view all RADIUS
servers currently added to the VPN, use the list command.
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

3070Nvg 3050Nvg 3070Svm 10001000 con?guration guide

Table of Contents