Nortel 3050 Command Reference Manual page 176

176 Command Reference
Table 51
WholeSecurity Menu Options (/cfg/vpn/aaa/wholesec)
Command Syntax and Usage
quick <WholeSecurity server name> <WholeSecurity deployment
name>
url <URL>
logouturl <URL>
ena
dis
Copyright © 2007 Nortel Networks
.
Lets you run a wizard for enabling WholeSecurity and specifying all the
information required for a fully functioning WholeSecurity setup. See the
Application Guide for VPN for instructions on what information to supply
in the wizard.
Lets you enter a URL to the WholeSecurity Confidence Online server,
according to the following format:
https://<confidence_online_server>/llclient
/<deployment>/online.html.
For example, if the Confidence Online server is running at confidence.exa
mple.com and the deployment is called NortelSSLVPN, the resulting URL
would be:
https://confidence.example.com/llclient/NortelSSLVPN/on
line.html
The URL to which the remote user will be redirected on logoff. When
WholeSecurity is enabled, the Login page will not be displayed when the
user logs out from the Portal session.
Enables WholeSecurity (disabled by default).
Disables WholeSecurity.(disabled by default).
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007