Nortel 3050 Command Reference Manual page 36

36 Command Reference
Number of BO down:0
tunnels in
state
BotunProf At host
------ VPN Number: '4' ------
Number of enabled BO tunnels: 0
Number of BO down:0
tunnels in
state
The output shows the name of the branch office tunnel profile, the NVG
host from which the tunnel is set up, the tunnel state (up, phase1 or
down), encrypted data in kBytes and decrypted data in kBytes. The up
tunnel state means that both ISAKMP and IPsec SAs are established,
whereas the phase1 state indicates that only the ISAKMP SA is
established).
The output also shows the time the tunnel has been active
(hours:minutes:seconds).
info/ippool Ippool Command
>> information ippool
*** Pool '1' for 'VPN 2'
type = local
proxyarp= on
hostroute= false
range= 2.2.2.2.-2.2.2.100
free=
Copyright © 2007 Nortel Networks
.
phase1:0 up:0
State Enc (KB)
phase1:0 up:0
2.2.2.2
2.2.2.3
2.2.2.4
2.2.2.5
2.2.2.6
2.2.2.7
2.2.2.8
2.2.2.9
2.2.2.10
2.2.2.11
2.2.2.12
2.2.2.13
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007
Dec (KB) Time