Nortel 3050 Command Reference Manual page 248

248 Command Reference
Table 84
Access Rule Menu Options (/cfg/vpn/aaa/group/access) (cont'd.)
Command Syntax and Usage
action accept|reject
del
/cfg/vpn <id> /aaa/group <id> /linkset Linkset Mapping
Configuration
[Linksets Menu]
list - List all values
del - Delete a value by number
add - Add a new value
insert - Insert a new value
move - Move a value by number
The Linksets menu is used to map linksets to the current group. A linkset
consists of one or several Portal links, defined with the /cfg/vpn
#/linkset #/link command. The same linkset can be mapped to
several groups. If a remote user belongs to several groups, all links in
all linksets pertaining to the user's different groups will displayed on the
Portal's Home tab when the user logs in.
Copyright © 2007 Nortel Networks
.
Lets you reference a previously configured appspec definition. An
appspec definition identifies a path, e.g. /public.
To view available appspec entries, press TAB following the appspec
command.
Example: To restrict access to a specific subdirectory on a host,
reference the appspec entry that identifies the desired path.
To configure an appspec definition, use the /cfg/vpn
#/aaa/appspec command.
Sets the action that is triggered when an SSL VPN user's request
results in a match.
•
accept: The user's request is accepted, and access to the resource
is granted.
•
reject: The user's request is rejected, and the browser displays an
error message.
The default action setting is reject.
Removes the current access rule from the group.
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007