Nortel 3050 Command Reference Manual page 259

/cfg/vpn <id> /aaa/radacct RADIUS Accounting Configuration
[Radius Accounting Menu]
servers - RADIUS accounting servers menu
vpnattribu - VPN attribute menu
ena - Enable RADIUS accounting
dis - Disable RADIUS accounting
The RADIUS Accounting menu is used to enable or disable RADIUS
accounting and to display the RADIUS accounting servers menu, where
one or more RADIUS accounting servers can be added to the current
VPN. With a RADIUS accounting server configured, an accounting
request start packet will be sent to the accounting server for each user
that successfully authenticates to the NVG. The start packet contains the
following information:
•
•
•
When a user session is terminated, an accounting request stop packet is
sent to the accounting server containing the following information:
•
•
•
The RADIUS server should be configured according to the
recommendations in RFC 2866.
Table 90
RADIUS Accounting Menu Options (/cfg/vpn/aaa/radacct)
Command Syntax and Usage
servers
vpnattribu
Copyright © 2007 Nortel Networks
.
/cfg/vpn <id> /aaa/radacct RADIUS Accounting Configuration 259
Client user name
The VPN Gateway 's IP address
Session ID
Session ID
Session time
Cause of termination
Note:
Using the /cfg/vpn #/adv/log command, the VPN Gateway
can be configured to generate detailed log messages to a syslog server.
The messages include information about Portal activities, for example
visited URLs, rejects etc.
Displays the RADIUS accounting servers menu. To view menu options,
see "/cfg/vpn <id> /aaa/radacct/servers RADIUS Accounting
Servers Configuration" (page
Displays the VPN Attribute menu. To view menu options, see
"/cfg/vpn <id> /aaa/radacct/vpnattribu VPN Attribute
Configuration" (page
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007
260).
261).