Nortel 3050 Command Reference Manual page 464

464 Command Reference
Table 205
Groups Menu Options (/cfg/sys/user/edit/groups) (cont'd.)
Command Syntax and Usage
add <group name [admin|oper|tunnelguard|certadmin] >
/cfg/sys/cur Current System Configuration
System:
Management IP (MIP) address = 10.1.82.144
Cluster Host 1:
Type of the host = master
IP address = 10.1.82.145
SysName =
SysLocation =
License =
IPSEC user sessions: 250
Secure Service Partitioning
PortalGuard
TPS: unlimited
SSL user sessions: 250
Default gateway address = 10.1.82.2
Ports = 1 : 2
Hardware platform = 3070
Host Routes:
No items configured
Host Interface 1:
IP address = 10.1.82.145
Network mask = 255.255.255.0
VLAN tag id = 0
Mode = failover
Primary port = 0
Host Interface Routes:
No items configured
Interface Ports:
2
Host Port 1:
Autonegotiation = on
Speed = 0
Full or half duplex mode = full
Copyright © 2007 Nortel Networks
.
Removes the user from the specified group. Only users with
Administrator rights can remove other users from groups.
Assigns the specified user to one of the built-in groups: admin, oper,
tunnelguard or certadmin.
To assign yet another group to the current user, use the add command
once again.
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007