Nortel 3050 Command Reference Manual page 230

230 Command Reference
Table 79
Subnet Menu Options (/cfg/vpn/aaa/network/subnet) (cont'd.)
Command Syntax and Usage
del
/cfg/vpn <id> /aaa/service <id> Service Access Configuration
[Service 1 Menu]
name - Set service name
protocol - Set allowed protocols
ports- Set allowed port
comment - Set comment
del - Remove Service
The Service menu is used to specify the services (ports and protocols)
to which members of a specific user group should be authorized when
requesting a resource. The name of the service (as specified using the
name command) can later be referenced to make up one of the access
rules for a specific user group.
See the "Groups, Access Rules and Profiles" chapter in the Application
Guide for VPN for a full explanation of groups, access rules and profiles.
Table 80
Service Menu Options (/cfg/vpn/aaa/service)
Command Syntax and Usage
name
Copyright © 2007 Nortel Networks
.
Sets the subnet mask for the network address, limiting the validity to a
specific host or range of hosts. The other settings in the access rule
thereby only apply to the specified range.
The default subnet mask is set to 255.255.255.255. Combined with the
default network address of 0.0.0.0, the default subnet mask mean that
no hosts can be accessed.
Note that the subnet mask can be entered in number of bits, for
example 32 instead of 255.255.255.255.
Removes the subnet from the current network definition.
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007