Nortel 3050 Command Reference Manual page 264

264 Command Reference
Table 93
Server Menu Options (/cfg/vpn/server) (cont'd.)
Command Syntax and Usage
adv
ena
dis
/cfg/vpn <id> /server/traceTrace Configuration
[Trace Menu]
ssldump - Create traffic dump
tcpdump - Create traffic dump
ping - Ping through backend interface
dnslookup - Lookup a name in DNS through backend interface
traceroute - traceroute through backend interface
The Trace menu is used for capturing and analyzing SSL and TCP traffic
flowing between clients and the portal server. The commands can be
useful for debugging purposes. The ssldump command will decrypt
transmitted data traffic, provided private keys and certificates have been
configured properly on the selected virtual SSL server.
The ssldump and the tcpdump commands can be permanently
deactivated in the NVG cluster. For more information, see the
/cfg/sys/distrace command on page
Table 94
Trace Menu Options (/cfg/vpn/server/trace)
Command Syntax and Usage
ssldump interactive|tftp|ftp|sftp
Copyright © 2007 Nortel Networks
.
Displays the Portal settings menu. To view menu options, see
"/cfg/vpn <id> /server/portal Portal Server Settings
Configuration" (page 284).
Displays the Advanced settings menu. To view menu options, see
"/cfg/vpn <id> /server/adv Advanced Settings Configuration"
(page 287).
Enables the SSL functionality on the portal server.
Disables the SSL functionality on the portal server.
Note: Only the VPN's SSL functionality is disabled. If you have
previously enabled IPsec (using the /cfg/vpn #/ipsec/ena
command, this setting is not affected.
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007
"distrace" (page 422) .