Nortel 3050 Command Reference Manual page 407

This menu is used to configure a list of alternate sites to connect if the
primary site is inaccessible. When NDIC connects, it retrieves this list and
stores it as part of the profile. NDIC refreshes the list on every connection.
Later, if NDIC fails to connect to the primary site, it will try to connect to the
alternate sites one by one.
Table 161
Client fail over menu options (/cfg/vpn 1/sslclient/failover)
Command syntax usage
list
lists all the configured servers.
add
adds a server to the list.
del
deletes an entry by specifying an index to the list.
/cfg/vpn <id> /adv Advanced VPN Configuration
[Advanced Menu]
interface
dns
rsa
license
log
vpnadmin
migration
usepac
The Advanced menu mainly contains commands for Secure Service
Partitioning, i.e. the ability for Internet Service Providers (ISPs) to host
multiple VPN customers in a cluster of VPN Gateways. This includes
binding the current VPN to a specific VPN customer's network, specifying
the VPN customer's DNS server, allocate licenses to the VPN and setting
the rights for VPN administration.
Copyright © 2007 Nortel Networks
.
/cfg/vpn <id> /adv Advanced VPN Configuration 407
Note:
•
The alternate site list is not exposed to the end user and is not
editable by the end user.
•
Failover command will be visible only when NetDirect is
enabled.
- Set backend interface used by VPN
- DNS Settings Menu
- RSA Servers
- VPN license allocation menu
- Set log settings
- Allow administration of vpn
- Set session migration mode
- Set PAC support in Java Applets
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007