Nortel 3050 Command Reference Manual page 304

304 Command Reference
Table 111
User Tunnel Profile Menu Options (/cfg/vpn/ipsec/utunprof) (cont'd.)
Command Syntax and Usage
splitnets
banner
usebanner on|off
client
policies
Copyright © 2007 Nortel Networks
.
/splitnets Split Networks Configuration" (page
through the client's normal network interface. All other IPsec client
traffic is tunneled through the VPN Gateway. SSL connectivity is
allowed if the Portal IP is in a specified network.
•
enabled_inverse_local. IPsec client traffic is not tunneled to
directly connected networks. All other IPsec client traffic is tunneled
through the VPN Gateway. SSL connectivity to the Portal after the
tunnel is established will not be allowed.
•
enabled_inverse_portal. Tunnels all IPsec client traffic to the VPN
Gateway and allows SSL connectivity to the Portal after the tunnel
is established.
The default value is enabled_inverse_portal.
Displays the Split networks menu. To view menu options, see
"/cfg/vpn <id> /ipsec/utunprof <id> /splitnets Split
Networks Configuration" (page
Lets you enter a text string of your own choice to customize the login
banner for the Nortel IPsec VPN client (formerly Contivity). The banner
appears at the top of the IPsec VPN client upon login.
Enables/disables display of the banner (if any) configured with the
banner command (see above).
The default value is off.
Displays the Client PC menu. To view menu options, see
<id> /ipsec/utunprof <id> /client Client PC Control
Configuration" (page 309).
Displays the Client policy rules menu. To view menu options, see
"/cfg/vpn <id> /ipsec/utunprof <id> /policies Client Policy
Configuration" (page 310).
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007
308).
308)), i.e. goes
"/cfg/vpn