Nortel 3050 Command Reference Manual page 244

244 Command Reference
Table 83
Group Menu Options (/cfg/vpn/aaa/group) (cont'd.)
Command Syntax and Usage
wiper on|off
citrix on|off
Copyright © 2007 Nortel Networks
.
For more information about Tunnel Guard with configuration examples,
see the "Configure Tunnel Guard" chapter in the Application Guide for
VPN .
This command is only visible if Nortel IE cache wiper support has
been delegated to group level, i.e. the /cfg/vpn #/portal/wiper
command has been set to group.
•
on: Users belonging to the current group will have the option to
download the Nortel IE cache wiper when logging in to the Portal (if
using Internet Explorer). If downloaded, the IE cache wiper will clear
the cache and browser history when the Portal session is terminated
or when the browser is closed. Note that this only applies to HTML
pages accessed through the Portal during the secure session.
Previously cached content and history entries will not be cleared.
•
off: The IE cache wiper cannot be downloaded by the user.
If the remote user belongs to several groups, the IE cache wiper is
enabled if it is enabled for any of the groups.
The default setting is on.
This command is only visible if Citrix Metaframe support has been
delegated to group level, i.e. the /cfg/vpn #/portal/citrix
command has been set to group.
•
on: When users belonging to the current group logs in to the Portal,
a Java applet is started. The applet enables support for Citrix
Metaframe web links on the Portal. The Portal link is easily created
by simply specifying the URL to the Citrix Metaframe server with
the internal link type (also see
/link <id> /internal Internal Link Configuration" (page
•
off: Links to Citrix Metaframe servers are only supported if created
by means of the custom port forwarder link type. If Citrix Metaframe
links are not used, off is the recommended setting, because this
saves the NVG from starting the Java applet that supports this
feature.
If the remote user belongs to several groups, Citrix Metaframe support
is enabled if it is enabled for any of the groups.
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007
"/cfg/vpn <id> /linkset <id>
385)).