Nortel 3050 Command Reference Manual page 443

/cfg/sys/adm/snmp SNMP Management Configuration
[SNMP Menu]
ena - Enable SNMP
dis - Disable SNMP
versions - Set SNMP versions supported
snmpv2-mib - SNMPv2-MIB menu
community - SNMP community menu
users- SNMP USM Users Menu
target - Notification target menu
event- DISMAN-EVENT-MIB menu
The SNMP menu is used for configuring network management of your
VPN Gateways. SNMP (Simple Network Management Protocol) is a set
of protocols for managing complex networks. SNMP works by sending
messages, called protocol data units (PDUs), to different parts of a
network. SNMP-compliant agents on the VPN Gateway s store data about
themselves in Management Information Bases (MIBs) and return this data
to the SNMP requesters.
Table 188
SNMP Menu Options (/cfg/sys/adm/snmp)
Command Syntax and Usage
ena
dis
versions <comma separated list of desired versions>
snmpv2-mib
community
users
Copyright © 2007 Nortel Networks
.
/cfg/sys/adm/snmp SNMP Management Configuration 443
Enables network management through SNMP.
Disables network management through SNMP.
Lets you specify the allowed SNMP version(s).
The default value is that all (v1, v2c and v3) SNMP versions are
supported.
Displays the SNMPv2-MIB menu. To view menu options, see
"/cfg/sys/adm/snmp/snmpv2-mib SNMPv2-MIB Configuration"
(page 444).
Displays the SNMP Community menu. To view menu options, see
"/cfg/sys/adm/snmp/community SNMP Community Configuration"
(page 445).
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007