Nortel 3050 Command Reference Manual page 414

414 Command Reference
/cfg/vpn <id> /adv/rsa VPN RSA Servers Configuration
[VPN RSA Servers 1 Menu]
rsaname - Set RSA server symbolic name
import - Import sdconf.rec file
rmnodesecr - Remove Node Secret
del - Remove RSA server
The VPN RSA Servers menu includes commands to configure
VPN-specific RSA servers. Note that there is also the option to configure
global RSA servers using the /cfg/sys/rsa command. Irrespective
of where the RSA servers are configured, all configured RSA servers
(both VPN-specific and global) will be available for selection using the
/cfg/vpn #/aaa /auth #/rsa/rsaname command.
Table 165
VPN RSA Servers Menu Options (/cfg/vpn/adv/rsa)
Command Syntax and Usage
rsaname
import <protocol [tftp|ftp|scp|sftp]> <server host name or IP address>
<file name on server> <FTP user name and password>
rmnodesecr
del
Copyright © 2007 Nortel Networks
.
Sets the symbolic name of the RSA server. This name should
correspond to the name assigned to the authentication method
using the /cfg/vpn #/aaa/auth #/rsa/rsaname command (see
"/cfg/vpn <id> /aaa/auth <id> /rsa RSA SecurID Configuration"
(page 218)).
Lets you import a copy of the sdconf.rec file from a TFTP/FTP/SCP/
SFTP server. The sdconf.rec file is a configuration file that contains
critical RSA ACE/Server information. Contact your RSA ACE/Server
administrator to obtain the file and make it available on the desired
TFTP/FTP/SCP/SFTP server.
If needed, the RSA node secret can be removed using this command.
Authentication will then fail until the Node secret created check box is
unchecked in the Edit Agent Host window on the RSA server.
Deletes the current RSA server information.
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007