Nortel 3050 Command Reference Manual page 450

450 Command Reference
Table 194
Audit Menu Options (/cfg/sys/adm/audit) (cont'd.)
Command Syntax and Usage
vendortype
ena
Copyright © 2007 Nortel Networks
.
Assigns the SMI Network Management Private Enterprise Code—as
defined by IANA in the file http://www.iana.com/—to the Vendor-Id
attribute.
The Vendor-Id—represented by the private enterprise number—is a
value for RADIUS' standard attribute vendor-specific (26).
The default vendor-Id is set to 1872 (Alteon).
Note: If another vendor-Id is used by your RADIUS system, you can use
the vendorid command to bring the RADIUS configuration in line with
the value used by the remote RADIUS system. Contact your RADIUS
system administrator for more information.
If you want to use a standard attribute type as defined in RFC 2865,
set vendorid to 0. Then configure the desired standard attribute type
as the vendor type value.
Assigns a number to the Vendor-Type attribute used in RADIUS.
Used in combination with the Vendor-Id number, the Vendor-Type
number identifies the audit attribute which will contain the audit
information.
The default vendor type value is set to 2.
Tip! Finding audit entries in the RADIUS server's log can be made
easier by defining a suitable string in the RADIUS server's dictionary
(for example Alteon-SSL-Audit-Trail) and mapping this string to the
vendor type value.
Note: If another number for vendor type is used by your RADIUS
system, you can use the vendortype command to bring the RADIUS
configuration in line with the value used by the remote RADIUS system.
Contact your RADIUS system administrator for more information.
If you want to use a standard attribute type as defined in RFC 2865,
set vendorid to 0. Then configure the desired standard attribute type
as the vendor type value.
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007