Nortel 3050 Command Reference Manual page 100

100 Command Reference
The TCP Settings menu is used for configuring various TCP timeout and
buffer size settings on both the client and the virtual SSL server side.
Table 25
TCP Settings Menu Options (/cfg/ssl/server/tcp)
Command Syntax and Usage
cwrite <client write timeout>
ckeep <client keep alive timeout>
skeep <SSL VPN client keep alive timeout>
swrite <server write timeout>
sconnect <server connect timeout>
csendbuf auto| <buffer size (2000-100000 bytes)>
Copyright © 2007 Nortel Networks
.
Sets the timeout value for how long the virtual SSL server should wait for a
write operation towards the client(s) to complete.
The default client write timeout value is 15m = 15 minutes.
Sets the timeout value for how long the virtual SSL server should wait
before closing an idle session.
The default client keep alive timeout value is 15m = 15 minutes.
If the SSL VPN client stops communicating with the VPN Gateway, this
timeout value determines for how long the SSL VPN client should be kept
alive before the remote user is logged out.
The default SSL VPN client keep alive timeout value is 2m = 2 minutes.
The skeep command is only available for virtual servers of the socks type.
Sets the timeout value for how long the virtual SSL server should wait for a
write operation towards the backend server(s) to complete.
The default server write timeout value is 15m = 15 minutes.
Sets the timeout value for how long the virtual SSL server should wait for a
server connection when trying to open a TCP connection.
The default server connect timeout value is 30s = 30 seconds.
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007