Nortel 3050 Command Reference Manual page 40

40 Command Reference
The bottom table which includes all VPNs shows license usage per VPN
and license type. The preceding example reveals that a third VPN exists in
the cluster and that 22 remote users belonging to that VPN are currently
logged in.
/info/isdlist iSD List Command
>> Information# isdlist
IP addr
192.168.128.122 master
192.168.128.123 master
192.168.128.124 master
192.168.128.125 slave
The output shows the IP addresses, master/slave assignments, CPU
usage, memory usage, and operational status for all the VPN Gateways
in the cluster. An asterisk (*) in the MIP column indicates which VPN
Gateway in the cluster is currently is control of the Management IP. An
asterisk (*) in the Local column indicates the particular VPN Gateway to
which you have connected.
/info/local Information Local Command
>> Information# local
Alteon iSD SSL
Hardware platform: 3070
Software version 7.0.1
Up time: 5 days 21 hours 40 minutes
IP address: 192.168.128.185
MAC address: 00:01:02:b1:25:c0
The output shows the current software version, hardware platform, up time
(since last boot), IP address, and Ethernet MAC address for the particular
VPN Gateway to which you have connected. If you have connected to the
MIP address, the information displayed relates to the VPN Gateway in the
cluster that currently is in control of the MIP.
/info/ethernet Information Ethernet Command
>> Information# ethernet
Net 1: RX packets:2618 errors:0 dropped:0 overruns:1 frame:0
Net 1: TX packets:221 errors:0 dropped:0 overruns:0 carrier:0
collisions:0
Net 1: RX bytes:192038 (187.5 Kb) TX bytes:13298 (12.9 Kb)
The output shows statistics for the Ethernet network interface card (NIC)
on the particular VPN Gateway to which you have connected. If you have
connected to the MIP address, the information displayed relates to the
Copyright © 2007 Nortel Networks
.
type MIP Local cpu(%) mem(%)
*
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007
4 14 up
* 4 14
4 14
down
op
up
up