Nortel 3050 Command Reference Manual page 444

444 Command Reference
Table 188
SNMP Menu Options (/cfg/sys/adm/snmp) (cont'd.)
Command Syntax and Usage
target
event
/cfg/sys/adm/snmp/snmpv2-mib SNMPv2-MIB Configuration
[SNMPv2-MIB Menu]
sysContact - Set sysContact
snmpEnable - Set snmpEnableAuthenTraps
The SNMPv2-MIB menu is used for configuring parameters in the standard
SNMPv2 Management Information Base (MIB) for the system.
The sysName and sysLocation parameters are set per host, under
/cfg/sys/host #.
Table 189
SNMPv2-MIB Menu Options (/cfg/sys/adm/snmp/snmpv2-mib)
Command Syntax and Usage
sysContact
snmpEnable disabled|enabled
Copyright © 2007 Nortel Networks
.
Displays the SNMP Users menu for managing SNMPv3 users. To view
menu options, see "/cfg/sys/adm/snmp/users <number> SNMPv3
Users Configuration" (page
If you type the index number of a new user, a wizard will prompt you for
the information available on the SNMP Users menu.
Displays the Notification Target menu. To view menu options, see
"/cfg/sys/adm/snmp/target <id> SNMP Notification Target
Configuration" (page 447).
Displays the Event menu. To view menu options, see
/snmp/event SNMP Event Configuration" (page
Designates a contact person for the managed NVG cluster, together
with information on how to contact this person.
Enables or disables generating authentication failure traps.
The default value is disabled.
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007
445).
"/cfg/sys/adm
448).