Nortel 3050 Command Reference Manual page 469

Table 208
Boot Menu Options (/boot) (cont'd.)
Command Syntax and Usage
delete
/boot/software Software Management Menu
[Software Management Menu]
cur - Display current software status
activate - Select software version to run
download - Download a new software package through FTP/SCP/SFTP
del - Remove unpacked/old releases
Copyright © 2007 Nortel Networks
.
/boot/software Software Management Menu 469
Reboots the particular VPN Gateway to which you have connected
through Telnet, SSH or a console connection. If you are connected
through Telnet or SSH to the Management IP address (MIP), use the
reboot command in the iSD Host menu (/cfg/sys/host #) instead.
Resets the particular VPN Gateway to which you have connected
through Telnet, SSH, or a console connection, to its factory default
configuration (all IP configuration is lost). The software itself will remain
intact. After having performed a delete, you can only access the
device through a console connection. Log in as the admin user with
the admin password to enter the Setup menu.
Note 1: If you receive a warning saying that the VPN Gateway you are
trying to delete has no contact with any (other) master VPN Gateway
in the cluster, you should also connect to the MIP address through
Telnet or SSH and delete the VPN Gateway from the cluster by using
the delete command in the iSD Host menu (/cfg/sys/host #).The
/boot/delete command is primarily intended for situations when you
want to delete a VPN Gateway that has either become isolated from the
cluster, or has been physically removed from the cluster without first
performing the delete command from the iSD Host menu (for more
information about the iSD Host menu options, see
<id> iSD Host Configuration" (page
use the /boot/delete command to present the Setup menu, from
which you can perform the new and join commands.
Note 2: When using the /boot/delete command on the ASA 310
FIPS model, you also have the option to reset the HSM cards on the
particular ASA 310 FIPS to which you have connected. For detailed
information about resetting the HSM cards, see the "Resetting.HSM
Cards on the ASA 310-FIPS" section in the "Troubleshooting the"
chapter in the User's Guide.
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007
"/cfg/sys/host
423)). In these situations, you must