Nortel 3050 Command Reference Manual page 334

334 Command Reference
Table 128
Full Access Menu Options (/cfg/vpn/portal/faccess) (cont'd.)
Command Syntax and Usage
contpass <password>
portalmsg
appletmsg
/cfg/vpn <id> /portal/lang Portal Language Configuration
[Portal Language Menu]
setlang - Set the language to be used in the portal
charset - Print charset in use
list - List supported languages
beconv - Backend charset conversion handling menu
The Portal Language menu is used to set the preferred language for the
Portal associated with the currently selected VPN. The portal automatically
tries to select the language for the user, based on the default language set
in the browser. The user will also be able to switch languages manually.
Table 129
Portal Language Menu Options (/cfg/vpn/portal/lang)
Command Syntax and Usage
setlang <ISO 639 language code>
Copyright © 2007 Nortel Networks
.
Contact the VPN Router administrator for more information.
Sets the VPN Router group password.
This is only required if the IPsec VPN client uses group authentication
to authenticate to the VPN Router.
Contact the VPN Router administrator for more information.
Lets you enter or paste a custom text to show up on the Full Access
tab on the Portal.
If no text is entered here, a default text will be displayed on the Full
Access tab.
Lets you enter or paste a custom text to show up in the upper section
of the Java applet window displayed when a remote user clicks the Yes
button on the Portal's Full Access tab.
If no text is entered here, a default text will be displayed in the Java
applet window.
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007