Nortel 3050 Command Reference Manual page 28

28 Command Reference
Table 5
Information Menu Options (/info) (cont'd.)
Command Syntax and Usage
ipsec <VPN ID> <prefix>
Copyright © 2007 Nortel Networks
.
Lists all users that have been idle longer than the time specified in the
command argument.
Examples of argument usage:
>> Information# idle 30
>> Information# idle 5m 2
>> Information# idle 1h 2 j*
>> Information# idle 1h 2 joe
The information includes VPN ID, user name, login time, last time active,
source IP address and access method.
For a sample screen output, see
(page 34).
Shows currently logged in IPsec users. The information includes user
name, user tunnel profile name, actual source IP address, new source IP
address allocated from IP pool, encrypted/decrypted data in kBytes and
session length.
Examples of argument usage:
>> Information# ipsec
>> Information# ipsec 2
>> Information# ipsec 2 s*
>> Information# ipsec 2 staff
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007
Lists all SSL users who have been
idle more than 30 seconds.
Lists all SSL users currently
logged in to VPN 2 who have been
idle more than 5 minutes.
Lists all SSL users currently
logged in to VPN 2, whose user
name begins with the letter "j",
who have been idle more than 1
hour.
Lists all SSL users currently
logged in to VPN 2, whose user
name is exactly "joe", who have
been idle more than 1 hour.
"info/idleusers Idleusers Command"
Lists all currently logged in users
for all VPNs.
Lists all users currently logged in
to VPN 2.
Lists all users currently logged
in to VPN 2, whose user tunnel
profile name begins with the letter
"s ".
Lists users currently logged in to
VPN 2, whose user tunnel profile
name is exactly "staff ".