Nortel 3050 Command Reference Manual page 463

/cfg/sys/user/edit <username> /groups User Access Groups Menu 463
Table 204
User <username> Menu Options (/cfg/sys/user/edit)
Command Syntax and Usage
password <own login password> <login password for user>
<confirm login password for user>
groups
cur
/cfg/sys/user/edit <username> /groups User Access Groups
Menu
[Groups Menu]
list - List all values
del - Delete a value by number
add - Add a new value
The Groups menu is used to set or change the group assignment for
a user. Whenever a new user account is added, the new user must
be assigned to a group. Only the Administrator user can add a new
user account to the system, but any user can grant an existing user
membership in a group in which the granting user is already a member.
By default, the Administrator user is a member of all four built-in groups
and can therefore add a new user to any of these groups. A certificate
administrator however, which presumably is a member of the certadmin
group, can only add an existing user to the certadmin group.
Table 205
Groups Menu Options (/cfg/sys/user/edit/groups)
Command Syntax and Usage
list
del <group by index number>
Copyright © 2007 Nortel Networks
.
Sets the login password for the specified user. The password can
contain spaces and is case sensitive.
Displays the Groups menu. To view menu options, see
"/cfg/sys/user/edit <username> /groups User Access Groups
Menu" (page 463).
Displays the current group settings for the specified user.
Lists the current group assignment of the specified user.
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007