Nortel 3050 Command Reference Manual page 266

266 Command Reference
Table 94
Trace Menu Options (/cfg/vpn/server/trace) (cont'd.)
Command Syntax and Usage
dnslookup <host name or IP address>
traceroute <host name or IP address of target station >
/cfg/vpn <id> /server/ssl SSL Settings Configuration
[SSL Settings Menu]
cert
cachesize
cachettl
Copyright © 2007 Nortel Networks
.
Use this command to verify station-to-station connectivity across the
network. If a backend interface is mapped to the current VPN, the
check is made through that backend interface.
To map a backend interface to the VPN, use the /cfg/vpn
#/adv/interface command.
To be able to use a host name, the DNS parameters must be
configured. To configure a DNS server specific for the VPN, use the
/cfg/vpn #/adv/dns/servers command or use the default DNS
server (/cfg/sys/dns).
Use this command to find the IP address or host name of a machine.
If a backend interface is mapped to the current VPN, the check is made
through that backend interface. If a DNS server is configured for the
current VPN, the check is made against that DNS server.
To map a backend interface to the VPN, use the /cfg/vpn
#/adv/interface command. To configure a DNS server specific for
the VPN, use the /cfg/vpn # /adv/dns/servers command.
Use this command to identify the route used for station-to-station
connectivity across the network. If a backend interface is mapped to the
current VPN, the check is made through that backend interface.
To map a backend interface to the VPN, use the /cfg/vpn
#/adv/interface command.
To be able to use a host name, the DNS parameters must be
configured. To configure a DNS server specific for the VPN, use the
/cfg/vpn #/adv/dns/serverscommand or use the default DNS
server (/cfg/sys/dns).
- Set server certificate
- Set SSL cache size
- Set SSL cache timeout
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007