Nortel 3050 Command Reference Manual page 167

Table 48
AAA Menu Options (/cfg/vpn/aaa) (cont'd.)
Command Syntax and Usage
network
service
appspec
filter
Copyright © 2007 Nortel Networks
.
>> AAA # authorder
Current value: 1
Enter auth order (comma separated): 3,2,1
Where number 3 = Local Database, number 2 = LDAP, and number 1 =
RADIUS in this example.
Note: Even if you have defined only one authentication method, the
corresponding authentication ID must be specified with the authorder
command. To view which authentication ID number that corresponds
to a currently configured authentication method, use the /cfg/vpn #
/aaa/cur command.
Displays the Network menu, after you have typed the index number or
name of an existing network or the index number of a new network. To view
existing network entries, press TAB following the network command.
To view menu options, see
Network Access Configuration" (page
Displays the Service menu, after you have typed the index number or
name of an existing service or the index number of a new service. To view
existing service entries, press TAB following the service command.
To view menu options, see
Service Access Configuration" (page
Displays the Appspecific menu, after you have typed the index number or
name of an existing appspec entry or the index number of a new appspec
entry. To view existing appspec entries, press TAB following the appspec
command.
To view menu options, see
Application Specific Menu" (page
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007
/cfg/vpn <id> /aaa AAA Configuration 167
"/cfg/vpn <id> /aaa/network <id>
228).
"/cfg/vpn <id> /aaa/service <id>
230).
"/cfg/vpn <id> /aaa/appspec <id>
232).