Nortel 3050 Command Reference Manual page 130

130 Command Reference
/cfg/ssl/server <id> /adv /loadbalanc Load Balancing
Settings
[Load Balancing Settings Menu]
type - Set load balancing type
persistence - Set persistence strategy
cookie - Cookie settings menu
metric - Set load balancing metric
health - Set health check type
script - Health check script menu
interval - Set health check interval(s)
remote ssl - Remote SSL connect menu
back end- Back end servers menu
ena - Enable load balancing
dis - Disable load balancing
The Load Balancing Settings menu is used for configuring the various
settings related to persistency in client connections, load balancing of
backend servers, and health checking of the backend servers. To access
the Load Balancing Settings menu, the selected virtual SSL server must
be set to the generic or http type.
Table 36
Load Balancing Settings Menu Options (/cfg/ssl/server/adv /loadbalanc)
Command Syntax and Usage
type all|string
Copyright © 2007 Nortel Networks
.
Specifies the load balancing type applied to configured backend
servers. Valid options are:
•
all: All backend servers are load balanced according to the
specified load balancing metric. Load balancing strings that may
have been defined are ignored.
•
string:Only those backend servers for which you have configured
one or more match strings are load balanced. Load balancing of
these backend servers occur only when a match of the specified
string is found in a client request; the load balancing is then
performed in accordance with the load balancing metric you have
specified. To load balance all backend servers when type is set
to string, make sure you have configured each backend server to
use one or more match strings. Backend servers are configured by
using the /cfg/ssl/server #/adv/loadbalanc/backend #
command.
Note: When the load balancing type is set to string, persistency
options set to cookie or session are ignored.
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007