Nortel 3050 Command Reference Manual page 309

/cfg/vpn <id> /ipsec/utunprof <id> /client Client PC Control Configuration 309
/cfg/vpn <id> /ipsec/utunprof <id> /client Client PC
Control Configuration
[Client PC Menu]
scrsavepwd - Require client screen saver password
time - Set screen saver activation time
storepwd - Allow client to store password
The Client PC menu includes commands to manage password security
on the client PC.
Table 116
Client PC Control Menu Options (/cfg/vpn/ipsec/utunprof/client)
Command Syntax and Usage
scrsavepwd on|off
time <value in seconds>
storepwd on|off
Copyright © 2007 Nortel Networks
.
•
on. Screen saver password required. Security feature that forces
the client to use a password in association with a screen saver. If
the user leaves the system and is connected to a tunnel, the system
gets locked out of the tunnel once the screen saver kicks in. The
end user would enable this feature from the Start>Settings>Control
Panel>Display>Screen Saver>Password Protected check box.
•
off. Screen saver password not required.
The default value is off.
This setting is used together with the scrsavepwd (see above)
setting. It defines the maximum time before the client's screen saver
is activated. The value on the Client PC can be changed from the
Start>Settings>Control Panel>Display>Screen Saver>Wait list box.
The default value is 300 seconds.
•
on. Allows client systems to save the login password in its password
list.
•
off. Requires that the remote user enters the password each time
he requests authentication and access to an IPsec tunnel.
The default value is on.
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007