Nortel 3050 Command Reference Manual page 434

434 Command Reference
The Date and Time menu is used for setting system date and system
time. It is also used for changing the time zone, and for accessing the
NTP Servers menu.
Table 180
Date and Time Menu Options (/cfg/sys/time)
Command Syntax and Usage
date <date (YYYY-MM-DD)>
time <time (HH:MM:SS)>
tzone
ntp
/cfg/sys/time/ntp NTP Servers Configuration
[NTP Servers Menu]
list - List all values
del - Delete a value by number
add - Add a new value
The NTP Servers menu enables you to list the configured NTP servers,
delete an NTP server, or add a new NTP server to the configuration.
Table 181
NTP Servers Menu Options (/cfg/sys/time/ntp)
Command Syntax and Usage
list
del <NTP server by index number>
add <IP address of NTP server>
Copyright © 2007 Nortel Networks
.
Sets the system date according to the specified format.
Sets the system time using a 24-hour clock format.
Sets the time zone. Select a continent or ocean, a country, and a
region (if applicable).
Displays the NTP Servers menu. To view menu options, see
"/cfg/sys/time/ntp NTP Servers Configuration" (page
Lists all configured NTP servers by their index number and IP address.
Removes the specified NTP server from the system configuration. Use
the list command to display the index numbers of all added NTP
servers.
Adds an NTP server to the system configuration. The NTP server you
add is used by the NTP client on the VPN Gateway to synchronize its
clock. NTP should have access to a number of servers (at least three)
to compensate for any discrepancies in the servers.
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007
434).